High Grade Copper at Browns Pb-Zb-Ag Prospect at Lyons River
Released
Released
Announcement PDF
ASX ANNOUNCEMENT:
ASX: DAL
31 October 2023
High Grade Copper at Browns Pb-Zn-Ag Prospect at Lyons River,
Gascoyne Province
_____________________________________________________________________________
Highlights
Copper Potential
•
•
High grade copper with assay results of 54.8% from rock chip sampling over the expanded
3.5km X 2km Browns base metal Pb-Zn-Ag-Cu prospect.
Copper assays of 1.64% also recorded at the Four Corners Pb-Zn-Ag prospect and other areas
following a review of historical data and assessment of copper potential of Lyons River Project.
Pb-Zn-Ag Potential
•
•
•
•
Maiden aircore drilling (AC) at Browns in the second half of 2022 had returned significant base
metal plus silver assay results confirming the discovery of a BHT mineralized system in the
Gascoyne Province including:
o 10m @ 1.04% Pb, 0.49% Zn, 2.85g/t Ag from 37m (LRAC010) Including 1m @ 3.13%
Pb, 0.24% Zn,5g/t Ag from 38m
o 63m @ 1.76g/t Ag from 16m (LRAC032)
o 16m @ 1.43g/t Ag from 68m (LRAC033)
o 21m @ 0.33% Pb, 0.17% Zn, 0.52g/t Ag from 1m (LRAC034)
An Exploration Incentive Scheme (“EIS”) grant of $180,000 has been awarded to co-fund
maiden diamond drill program at Browns. Four deep diamond drill holes are being planned to
test the significant Browns base metal and copper target.
Induced Polarisation surveys to be completed at Browns to model deeper sulphide
mineralisation prior to diamond drill testing.
Area wide heritage surveys completed at Browns and POW approvals are in place.
_____________________________________________________________________________
Dalaroo Metals Ltd (Dalaroo or Company) (ASX Code: DAL) is pleased to advise that high grade copper
assay results of 54.8% coupled with silver grades of 80g/t have been returned from its rock chip sampling
program over the Browns base metal prospect (Figures 1, 2 and 4). Gossanous outcrops sampled to the
east of the AC drilled area have returned Pb values of up to 0.53% complemented by anomalous zinc
(1140ppm) and copper (420ppm) at the Lyons River Project (“Lyons River”).
Lyons River comprises a strategic (100% owned) land position of 740km2 within the Proterozoic
Mutherbukin Zone of the Gascoyne Province, Western Australia. Exploration drill programs by Dalaroo
and previous explorers including BHP since 2001 has shown that the district is an emerging Broken Hill
Type (“BHT”)/Sedimentary Exhalative (“SEDEX”) deposit setting. The Browns prospect is one of six PbZn soil geochemical prospects identified at Lyons River within a Proterozoic Age folded basin setting
covering an area of 30km by 10km (Figures 1 and 4).
Dalaroo’s Managing Director, Harjinder Kehal commented:
“It is encouraging to see copper mineralisation at surface with high grade results of 54.8% accompanied
by silver assays of 80g/t. We look forward to undertaking the next phase of drill testing at Browns funded
by an EIS grant of $180,000”.
Figure 1: Dalaroo Metals, Lyons River Project in the Gascoyne Province with neighbouring companies and
prospects
Technical Commentary
Copper Potential
A rock chip sampling program at the expanded 3.5km X 2km Browns base metal Pb-Zn-Ag prospect has
returned high grade copper with assay results of up to 54.8% at Lyons River (Figure 2). Copper assays of
1.64% have also been recorded from rock chip sampling previously completed at the Four Corners
prospect located 5km to the west of Browns.
Previous historical shallow RC drill program in 2008 at Four Corners returned an intersection of 3m @
0.50% Cu including 1m @ 0.92% Cu from 56m, with mineralisation associated chalcopyrite (Figure
3)(Refer DAL ASX Announcements from 16 March 2022). Copper assay results from both Browns and
Four Corners prospects are accompanied by silver assays of 80.0g/t and 21.5g/t respectively (Table 1).
Four Corners
Browns
Figure 2: Browns prospect, Pb soil geochemical anomalies (previously reported) and Pb rock chip sample assays,
high-grade copper rock chip sample location and proposed Induced Polarisation survey lines.
Figure 3: Four Corners prospect, drill hole location map with historical RC and diamond holes, DAL’s recently
completed RC drill holes and base metal results.
Photo 1: Copper (malachite) mineralisation in surface excavation and malachite rich chips at Browns prospect.
Photo 2: Outcropping copper mineralisation (malachite) at Four Corners prospect
Browns Pb-Zn-Ag Prospectivity and Potential
The Browns Prospect represents the second site of Pb-Zn-Ag intersections discovered by bedrock drilling
in the Mutherbukin Zone, 5km east of Dalaroo’s Four Corners Pb-Zn-Ag prospect (Figure 4). Two phases
of AC drilling at the Browns Prospect tested a very compelling broad Pb-Zn soil and rock chip
geochemical anomaly (max 1445ppm Pb, 1080ppm Zn) covering an area of 3.5km X 2.5km, associated
with extensive iron-rich and high-grade gossanous material at surface with results of up to 39.6% Pb, up
to 0.71% Zn and up to 82g/t Ag.
Detailed gravity work has complemented historical surveys by BHP and shows a coincident gravity low
suggesting an area of possible deepening basin development. An interpreted sub-basin fold or trough
structure at Browns may represent a deeper portion of the paleo-basin architecture and a favourable
environment for formation of prospective host stratigraphy (Figure 5). (Refer DAL ASX Announcements
from 25 July 2022 and 15 November 2022)
Figure 4: Lyons River, Browns prospect and other five Pb-Zn soil geochemical prospects /targets over
greyscale 1 Vertical Derivative Aeromagnetics image.
Figure 5: Map view of aircore drilling completed at Browns on ground gravity data basemap.
Sweet Spots for BHTs/ SEDEXs
Geoscience Australia’s 2019 study, using surface wave tomography and a parameterisation for
anelasticity at seismic frequencies shows 85% of world’s sediment hosted base metal deposits occur
within 200km of the edges of thick lithosphere. The Australian model shows striking correlation between
major sediment hosted deposits and edge of thick lithosphere, defined by 170km lithosphereaesthenosphere boundary (LAB) contour. Lyons River is located 156km away from the 170km LAB
contour (Figure 6).
Figure 6: Distribution of BHT/SEDEX deposits, function of lithospheric thickness in Australia
Dalaroo’s AC drill programs at Browns have been successful in intersecting zones of interbedded
psammitic to pelitic lithologies together with multiple zones of disseminated base metal sulphides such
as galena and sphalerite. More than 800m of strike length lead-zinc mineralisation has been outlined at
Browns which remains open in all directions (Figure 5). Ag intercepts are coincident with Pb and Zn
assays and further support the presence of BHT/SEDEX-style of mineralisation (Figure 6).
AC drilling programs have intersected thick zones of variably-pyritic, biotite-quartz gneiss, likely
representing metamorphosed shales, and found to be enriched in silver, returning 63m @ 1.76g/t Ag
from 16m and 16m @ 1.43g/t Ag from 68m (Figures 7) and has outlined the footprint of the Pb-Zn-Ag
mineralized system at the Browns prospect to approximately 400m in thickness in its central portion.
Significant Pb-Zn sulphide intercepts of 10m @ 1.04% Pb, 0.49% Zn, 2.85g/t Ag from 37m (LRAC010)
Including 1m @ 3.13% Pb, 0.24% Zn, 5g/t Ag from 38m and 63m @ 1.76g/t Ag from 16m adds weight to
this thesis. (Refer DAL ASX Announcement from 14 February 2023)
AC drilling undertaken highlights the prospectivity of the area and possibility of discovering a significant
BHT-SEDEX-style deposit at Browns prospect. Evidence that lead-zinc-silver mineralizing fluids have
circulated at the basin-wide scale five kilometres east from the already drilled Four Corners Prospect
backs up this theory. This in turn leads us to the conclusion there may be multiple base metal deposits
at our Lyons River Project.
Figure 7: Browns prospect, simplified cross section A-B (see Figure 5) displaying selected mineralised drilling
intercepts.
Next Steps at Lyons River Project
Dalaroo proposes to carry out a Dipole-Dipole Induced Polarisation (DDIP) geophysical surveys in the
next phase of exploration. The goal of these surveys will be the delineation of a mineralised body at
depth that possesses not just the surface geochemical signature, but also the geophysical properties
characteristic of a significant BHT/SEDEX deposit and copper mineralisation in the Browns Prospect area
prior to the EIS diamond drill program (Figure 2). (Refer DAL ASX – Announcements from 26 April 2023)
Deeper diamond drilling is expected to allow a better understanding of the geological transition to more
pyritic and phyllosilicate-rich units identified at the southern limits of the drill tested area interpreted to
represent a transition in the pre-metamorphic protolith stratigraphy to lower energy sedimentary units,
considered more prospective for BHT/SEDEX type deposits.
ENDS
For more Information:
Please visit our website for more information: www.dalaroometals.com.au
Harjinder Kehal, Managing Director on +61 400 044 890
Authorised for release to the ASX by the Board of Dalaroo Metals Ltd.
COMPETENT PERSON
The information in this report that relates to Exploration results is based on information compiled by
Dalaroo Metals Ltd and reviewed by Mr Harjinder Kehal who is the Managing Director of the Company
and is a Registered Practicing Geologist and Member of the AusIMM and AIG. Mr Kehal has sufficient
experience that is relevant to the style of mineralisation, the type of deposit under consideration and to
the activities undertaken to qualify as a Competent person as defined in the 2012 edition of the
“Australasian Code for Reporting of Exploration Results, Mineral Resources and Ore Reserves”. Mr Kehal
consents to the inclusion in this report of the matters based on this information in the form and context
in which it appears.
FORWARD-LOOKING INFORMATION
This report may include forward-looking statements. Forward-looking statements include, but are not
limited to, statements concerning the planned exploration program and other statements that are not
historical facts. When used in this report, the words "could", "plan", "estimate", "expect", "intend",
"should" and similar expressions are forward-looking statements. Although Dalaroo believes that its
expectations reflected in these forward-looking statements are reasonable, such statements involve
risks and uncertainties and no assurance can be given that actual results will be consistent with these
forward-looking statements.
CAUTIONARY NOTE
The statements and information contained in this report are not investment or financial product advice
and are not intended to be used by persons in deciding to make an investment decision. In releasing this
report, Dalaroo has not considered the objectives, financial position or requirements of any particular
recipient. Accordingly, potential investors should obtain financial advice from a qualified financial
advisor prior to making an investment decision.
Table 1: Lyons River Project, Browns prospect rock chip sample assays.
Sample_ID
Easting Northing Ag_ppm Cu_ppm Cu%
Pb_ppm Pb%
Zn_ppm Zn%
S_ppm
LR140923-1
376576 7283840
80 547700 54.77
25
22
38050
LR15005
378721 7284617
0
296
588
380
800
LR15006
378644 7284704
0
263
1540
0.15
460
450
LR15007
378589 7284715
1.5
420
5290
0.53
1140
0.11
450
LR15008
378716 7284709
0
333
497
324
1400
LR15009
378757 7284664
0
173
489
280
550
LR15012
379240 7284485
0
342
1050
0.11
508
1200
LR15014
378791 7284541
0
260
1950
0.20
312
1500
LR230527_18
379067 7287154
0
28
27
1590
0.16
3200
About the Lyons River Project
Lyons River is located approximately 1,100km north of Perth and approximately 220km to the northeast of the coastal town of Carnarvon, Western Australia. The Lyons River Project lies within the
Mutherbukin Zone of the Gascoyne Province, which is the deformed and high-grade metamorphic core
zone of the early Proterozioc Capricorn Orogen (Figure 8).
Figure 8: Lyons River Project location diagram
The majority of base metal exploration to date at Lyons River had focused on the Four Corners prospect
where an EIS funded diamond drill programme was completed in late 2020 by previous explorer Serena
Minerals Limited intersecting an encouraging primary zinc (sphalerite) and lead (galena) sulphide
mineralisation intercept in drill hole LRDD003 of 0.2m @ 3.05% Pb, 1.37% Zn and 3g/t Ag from 223.2m)
along the strike extent of the NE zone of the 2.5km Induced Polarisation anomaly peaking at 33 mV/V
(Figure 3).
Subsequently follow up RC holes drilled in December Quarter 2021 by the Company were successful in
intersecting zones of interbedded psammitic to pelitic plus mafic lithologies together with multiple
zones of disseminated base metal sulphides associated with significant pyrite intervals. (Refer DAL ASX
Announcement from 16 March 2022). Multi-element assay results received, highlighted encouraging
Pb, Zn and Ag intersections including:
•
•
Drill LRRC001 intersected 1m @ 0.43% Pb, 0.95% Zn and 7.5g/t Ag from 47m
Drill hole LRRC006 with 9m @ 0.34 % Pb, 0.21% Zn and 1g/tAg from 141m including 5m @ 0.48%
Pb, 0.26% Zn and 1.3g/t Ag from 144m
Of special note are the significant intervals of Ag assays that have been intersected in the RC drill
programme at Four corners with two holes (LRRC001 and LRRC006) returning Ag values of up to 7.5g/t
(Figure 3). The presence of Ag confirms that the Pb-Zn base mineralization outlined to date supports a
BHT/SEDEX setting model over Lyons River.
Appendix 1: Dalaroo Metals Ltd – Air core (AC) Drilling Program Lyons River Project –
Browns prospect - JORC Code Edition 2012: Table 1
Section 1: Sampling Techniques and Data
(Criteria in this section apply to all succeeding sections)
Criteria
JORC Code explanation
Commentary
Sampling
techniques
Nature and quality of sampling (e.g. cut Rock chip sampling
channels, random chips, or specific specialised
industry
standard
measurement
tools
appropriate to the minerals under investigation,
such as down hole gamma sondes, or handheld
x-ray fluorescence (XRF) instruments, etc). These
examples should not be taken as limiting the
broad meaning of sampling.
Include reference to measures taken to ensure
Rock chip samples comprised gossanous/iron
sample representivity and the appropriate
rich ferruginous oxide phases and containing
calibration of any measurement tools or systems
copper mineralisation.
used.
Aspects of the determination of mineralisation
Rock chip sample size of 1-4 kg.
that are Material to the Public Report.
In cases where ‘industry standard’ work has
been done this would be relatively simple (e.g.
‘reverse circulation drilling was used to obtain 1
m samples from which 3 kg was pulverised to
Rock chip sampling results are a first pass
produce a 30 g charge for fire assay’). In other
exploration technique that can assist in vectoring
cases, more explanation may be required, such
toward mineralisation
as where there is coarse gold that has inherent
sampling problems. Unusual commodities or
mineralisation types (e.g. submarine nodules)
may warrant disclosure of detailed information.
Drilling
techniques
Drill type (e.g. core, reverse circulation, open- No drilling results reported
hole hammer, rotary air blast, auger, Bangka,
sonic, etc.) and details (e.g. core diameter, triple
or standard tube, depth of diamond tails, facesampling bit or other type, whether core is
oriented and if so, by what method, etc.).
Drill sample
recovery
Method of recording and assessing core and chip No drilling results reported.
sample recoveries and results assessed.
Measures taken to maximise sample recovery No drilling results reported.
and ensure representative nature of the
samples.
Whether a relationship exists between sample
recovery and grade and whether sample bias No drilling results reported.
may have occurred due to preferential loss/gain
of fine/coarse material.
Criteria
JORC Code explanation
Commentary
Logging
Whether core and chip samples have been Sample type and landform/regolith settings were
geologically and geotechnically logged to a level recorded, and geo-tagged photos of samples and
of detail to support appropriate Mineral settings taken.
Resource estimation, mining studies and
metallurgical studies.
Whether logging is qualitative or quantitative in
No drilling results reported.
nature. Core (or costean, channel, etc.)
photography.
The total length and percentage of the relevant
intersections logged.
Subsampling
techniques and
sample
preparation
If core, whether cut or sawn and whether No sub-sampling has been undertaken.
quarter, half or all core taken.
If non-core, whether riffled, tube sampled,
rotary split, etc and whether sampled wet or dry.
For all sample types, the nature, quality and Sample preparation of samples follows industry
appropriateness of the sample preparation best practice standards and is conducted by
internationally recognized laboratories; i.e
technique.
Quality control procedures adopted for all Oven drying, jaw crushing and pulverising so that
subsampling stages to maximise representivity 90% passes -75 microns
of samples.
Measures taken to ensure that the sampling is There was no sub-sampling
representative of the in-situ material collected,
including for instance results for field
duplicate/second-half sampling.
Whether sample sizes are appropriate to the Entire sample submitted for assay and sample
size is considered appropriate for the material
grain size of the material being sampled.
being sampled.
Quality of assay The nature, quality and appropriateness of the Rock samples have been submitted to Bureau
data and
assaying and laboratory procedures used and Veritas Laboratories for analysis by 4-Acid Digest
laboratory tests whether the technique is considered partial or - 0.2g
total.
For geophysical tools, spectrometers, handheld Samples analysis and determined by Inductively
XRF instruments, etc, the parameters used in Coupled Plasma (ICP) Optical Emission
determining the analysis including instrument Spectrometry and Inductively Coupled Plasma
make and model, reading times, calibrations (ICP) Mass Spectrometry.
factors applied and their derivation, etc.
Nature of quality control procedures adopted
(e.g. standards, blanks, duplicates, external
laboratory checks) and whether acceptable
levels of accuracy (i.e. lack of bias) and precision
have been established.
Criteria
JORC Code explanation
Commentary
Verification of
sampling and
assaying
The verification of significant intersections by Anomalous geochemical thresholds
either independent or alternative company determined by a senior geologist
personnel.
were
The use of twinned holes.
None drilled.
Documentation of primary data, data entry
procedures, data verification, data storage All field data was manually collected, entered
(physical and electronic) protocols.
into excel spreadsheets, validated and loaded
Discuss any adjustment to assay data.
into Access database and processed by a number
of different exploration software.
None required
Location of
data points
Accuracy and quality of surveys used to locate All samples collected are located using a
drillholes (collar and downhole surveys), handheld GPS.
trenches, mine workings and other locations
used in Mineral Resource estimation.
Grid system used for geochemical sampling is
Specification of the grid system used.
GDA94 Zone 50
Quality and adequacy of topographic control.
For geochemical sampling nominal RLs based on
regional topographic data sets and handheld
GPS.
Data spacing
Data spacing for reporting of Exploration Rock chip sampling spacing
and distribution Results.
geology/structural framework.
Whether the data spacing and distribution is
sufficient to establish the degree of geological
MRE not being reported.
and grade continuity appropriate for the
Mineral Resource and Ore Reserve estimation
procedure(s) and classifications applied.
based
on
Whether sample compositing has been applied.
Orientation of
data in relation
to geological
structure
Whether the orientation of sampling achieves Sampling was of a reconnaissance nature only and
unbiased sampling of possible structures and the was not designed to achieve unbiased sampling.
extent to which this is known, considering the No drilling results reported.
deposit type.
If the relationship between the drilling
orientation and the orientation of key
mineralised structures is considered to have
introduced a sampling bias, this should be
assessed and reported if material.
Sample security The measures taken to ensure sample security.
Samples were collected into labelled polyweave
sacks which were sealed by cable ties. The
polyweave sacks were placed in bulka-bags and
transported to the laboratory by freight
company. Once the samples arrived at the
laboratory, the samples numbers were checked
against the sample submission form and no
errors were identified.
Criteria
JORC Code explanation
Commentary
Audits or
reviews
The results of any audits or reviews of sampling As part of the interpretation of the data the
techniques and data.
Company’s geologist undertook a review of the
assay data quality, including laboratory batch
effects. No significant biases were identified.
Section 2: Reporting of Exploration Results
(Criteria listed in the preceding section also apply to this section)
Criteria
JORC Code explanation
Commentary
Mineral
tenement and
land tenure
status
Type, reference name/number, location and
ownership including agreements or material
issues with third parties such as joint ventures,
partnerships, overriding royalties, native title
interests, historical sites, wilderness or national
park and environmental settings.
The Lyons River Project tenements are wholly
owned by Dalaroo Metals Ltd (“Dalaroo”)
The Project is located 220km north-east of
Carnarvon on Eudamullah Pastoral Station.
The Competent Person is unaware of any
The security of the tenure held at the time of
impediments to development of these
reporting along with any known impediments to
tenements.
obtaining a licence to operate in the area.
Exploration
done by other
parties
Acknowledgment and appraisal of exploration by Exploration of Lyons River has previously been
other parties.
undertaken by other parties including Audalia
Resources and Serena Minerals and the
Competent Person has referenced the parties
involved and the results of this work throughout
the text.
Audalia Resources and Serena Minerals
undertook exploration with a focus on base
metals during the period 2013 to 2021. Work
completed regional geological mapping,
geophysical surveys, rock chip sampling, stream
sediment sampling and soil sampling.
Geology
Deposit type, geological setting, and style of The primary mineralisation style being sought is
mineralisation.
metamorphosed base metal mineralisation of
the Broken Hill type (BHT) and SEDEX and
associated copper mineralisation.
Drillhole
information
A summary of all information material to the No drillholes are reported.
understanding of the exploration results
including a tabulation of the following
information for all Material drillholes:
• easting and northing of the drillhole collar
• elevation or RL (Reduced Level – elevation
above sea level in metres) of the drillhole
collar
• dip and azimuth of the hole
• down hole length and interception depth
Criteria
JORC Code explanation
• hole length.
Commentary
If the exclusion of this information is justified on The plan provided in the body of the report
the basis that the information is not Material and identifies the location of the rock chip sampling
this exclusion does not detract from the sites.
understanding of the report, the Competent
Person should clearly explain why this is the case.
Data
aggregation
methods
In reporting Exploration Results, weighting No metal equivalent values have been reported.
averaging techniques, maximum and/or
minimum grade truncations (e.g. cutting of high
grades) and cut-off grades are usually Material
and should be stated.
Where aggregate intercepts incorporate short
lengths of high-grade results and longer lengths
of low-grade results, the procedure used for such
aggregation should be stated and some typical
examples of such aggregations should be shown
in detail.
The assumptions used for any reporting of metal
equivalent values should be clearly stated.
Relationship
between
mineralisation
widths and
intercept
lengths
These relationships are particularly important in No mineralisation widths have been reported.
the reporting of Exploration Results.
Diagrams
Appropriate maps and sections (with scales) and Appropriate diagrams are included in the main
tabulations of intercepts should be included for body of this report
any significant discovery being reported These
should include, but not be limited to a plan view
of drillhole collar locations and appropriate
sectional views.
Balanced
reporting
Where comprehensive reporting of all Assay results presented are balanced.
Exploration Results is not practicable,
representative reporting of both low and high
grades and/or widths should be practiced to
avoid misleading reporting of Exploration
Results.
If the geometry of the mineralisation with respect
to the drillhole angle is known, its nature should
be reported.
If it is not known and only the downhole lengths
are reported, there should be a clear statement
to this effect (e.g. ‘downhole length, true width
not known’).
Criteria
JORC Code explanation
Other
substantive
exploration
data
Other exploration data, if meaningful and Detailed high quality aeromagnetic, Induced
material, should be reported including (but not Polarisation, gravity datasets and soil
limited to): geological observations; geophysical geochemistry
survey results; geochemical survey results; bulk
samples – size and method of treatment;
metallurgical test results; bulk density,
groundwater,
geotechnical
and
rock
characteristics;
potential
deleterious
or
contaminating substances.
Further work
The nature and scale of planned further work Appropriate plans for further work are provided
(e.g. tests for lateral extensions or depth in the body of the report.
extensions or large-scale step-out drilling).
Diagrams clearly highlighting the areas of
possible extensions, including the main
geological interpretations and future drilling
areas, provided this information is not
commercially sensitive.
Commentary
Share your feedback
Discover