Announcement PDF ASX ANNOUNCEMENT Dalaroo Makes High-Grade Gold Discovery at Bondoukou – 18 m at 7.31 g/t Au from Maiden Drilling FIRST-EVER DRILLING DELIVERS HIGH-GRADE BEDROCK GOLD AND BROAD GOLD MINERALISATION FROM SURFACE Highlights: • MAIDEN DRILLING DELIVERS STANDOUT HIGH-GRADE GOLD INTERCEPTS: the first two drill holes from Dalaroo Metals’ maiden reverse circulation (RC) drilling program at the Wilfred target at the Bondoukou Gold Ridge Project, Côte d’Ivoire, returned: o BDRC002 returned 18 m at 7.31 g/t Au from 63 m and a second zone of 16 m at 1.46 g/t Au from 113 m. o BDRC001 returned 23 m at 2.14 g/t Au from surface. • HIGH-GRADE BEDROCK GOLD IN A RECOGNISABLE GEOLOGICAL SETTING: the 18 m BDRC002 interval corresponds to strongly silicified volcaniclastic rock with quartz–sulphide veining and pyrite, providing an important geological indicator for systematic follow-up drilling and targeting guidance along the entire ~7 km corridor. • ~132 GRAM-METRES FROM SECOND RC HOLE: intersecting 18 m at 7.31 g/t Au represents approximately 132 gram-metres of downhole grade-thickness. The 23 m surface intersection in BDRC001 represents approximately 49 gram-metres. True widths and the continuity between intersections are not yet known. • GOLD IN BOTH HOLES ON THE FIRST-EVER DRILL PROGRAM: holes drilled from opposing directions both intersected gold mineralisation, including high-grade bedrock gold and broad oxide gold from surface. These first holes test only a small part of the approximately 7 km Gold Ridge corridor. True widths, geometry and continuity are not yet known. • A COMPELLING TARGETING STORY HAS CONVERTED INTO DRILL SUCCESS: a strong magnetic signature coincident with artisanal gold workings was followed by geological mapping, an approximately 7 km soil anomaly with a peak assay of 23.26 g/t Au, confirmatory auger drilling and now significant gold mineralisation in the first two RC holes (refer References 2 to 5). • SUBSTANTIAL EXPLORATION RUNWAY: assays from only two holes of the initial 24-hole, ~4,200 m orientation phase, which is the start of a much larger 102-hole, ~12,000 m program. This represents the first systematic drilling of Bondoukou across priority targets Wilfred, Mag and Ali. Nine holes for 1,750 m have been completed and BDRC010 is underway, with drilling continuing on both day and night shifts. 07 October 2026 2 dalaroometals.com.au | ASX: DAL Dalaroo Metals Limited (ASX: DAL, OTCQB: DALMF) (“Dalaroo” or “the Company”) is pleased to report results from the first two holes of its maiden reverse circulation (RC) drilling program at the Bondoukou Gold Ridge Project in Côte d’Ivoire. Both holes intersected significant gold mineralisation, headlined by 18 m at 7.31 g/t Au from 63 m in BDRC002. The results are from the first orientation holes at the Wilfred target and represent the first drilling undertaken across the approximately 7 km Gold Ridge target corridor. The maiden drill program is designed in two phases, with an initial 24-hole, ~4,200 m orientation phase forming part of a larger 102-hole, ~12,000 m RC program. The drill program represents the first systematic drilling of Bondoukou and is initially targeting Wilfred, Mag and Ali, across an approximately 7 km-long gold-anomalous corridor. The Gold Ridge target corridor lies within exploration permit (PR-825) in north-eastern Côte d’Ivoire, in which Dalaroo may earn up to an 80% interest through a joint venture with the permit holder, Goldridge SARL. Work began with a strong magnetic signature coinciding with historical and active artisanal gold workings. Geological mapping then outlined the prospective host rocks and structures, soil sampling defined a gold anomaly over approximately 7 km with a peak assay of 23.26 g/t Au, and auger drilling confirmed the anomalism below surface (refer References 2 to 5). The first two RC holes have intersected gold mineralisation in the oxide profile (BDRC001) and in fresh rock (BDRC002). For further information about Dalaroo, please click here. Table 1. Summary of significant intersections (≥5 gram-metres), BDRC001 and BDRC002 Hole From m To m Downhole width m Au g/t Gram-metres BDRC001 0 23 23 2.14 49.3 BDRC002 63 81 18 7.31 131.6 BDRC002 113 129 16 1.46 23.4 Notes: Selected intervals of ≥5 gram-metres only; all significant intersections, including lower-grade intervals and higher-grade inclusions, are reported in Table 2. Intersections are length-weighted averages of one-metre samples selected using geological boundaries and generally a nominal 0.1 g/t Au lower cut-off, with no more than two metres of internal dilution. No top cuts have been applied. All widths are downhole; true widths are not known. Management Commentary Dalaroo Chief Executive Officer, John Morgan, commented: “This is the start we were hoping for. Our very first drill holes at Wilfred have delivered 18 metres at 7.31 grams per tonne gold, including 12 metres at 8.66 grams per tonne, with a second 16-metre zone deeper in the same hole and 23 metres of gold from surface in BDRC001. Hitting gold in both holes, from both directions, on the first drill holes ever drilled along the 7-kilometre Gold Ridge corridor is a very encouraging result for Dalaroo and our shareholders, and an excellent start to our drill program. “The quality of the main intersection stands out. The 18-metre zone in BDRC002 represents around 132 gram- metres of gold, and the higher-grade core of 12 metres at 8.66 grams per tonne sits within a broader mineralised envelope. Just as encouraging are the 23 metres of oxide gold from surface in BDRC001 and the second zone of 16 metres at 1.46 grams per tonne further down BDRC002. To see multiple mineralised zones on the very first holes gives us a strong platform to build on. “These results also support our targeting. Every stage of work at Gold Ridge has built on the last. It started with a great magnetic signature that lined up with artisanal gold workings. Good geological mapping followed, then strong soil sampling results across a 7-kilometre corridor, which were confirmed by our auger drilling. These first two holes have now strengthened that picture and indicate that our approach is putting the drill bit in the right places. This corridor has never been drilled before, and Dalaroo can earn up to an 80% interest in the Gold Ridge permit through our joint venture with Goldridge SARL. I would like to thank our team in Côte d’Ivoire, our joint venture partner and the local communities for their support in getting this program off to such a strong start. 3 dalaroometals.com.au | ASX: DAL “It is early days, and the next results will tell us more about orientation, true width and continuity. But with the rig now running day and night, samples from the next two holes at the laboratory and 14 more holes to come in the orientation program, we look forward to regular news flow from the Bondoukou Gold Ridge Project. This first set of results covers only a small part of a 7-kilometre corridor, and with further drilling planned, it is the potential scale of Gold Ridge that excites us most.” Assay Results The first two holes returned the intersections in Table 2. Reported widths are downhole lengths and true widths are not known. Grades are length-weighted averages of one-metre primary samples. No top cuts have been applied. Samples were analysed by SGS Côte d’Ivoire in Yamoussoukro using a 50 g fire assay with an atomic absorption finish (FA50L/AA). Drill collar details are provided in Appendix 1 – Table 4. BDRC002 – Fresh rock high-grade zone from 63 m: The standout result is 18 m at 7.31 g/t Au from 63 m in BDRC002. Every one-metre sample in the interval returned at least 1.72 g/t Au, 14 of the 18 samples returned more than 5 g/t Au, and four exceeded 10 g/t Au, peaking at 15.90 g/t Au from 78 m. The zone has sharp margins: the samples immediately above and below the interval returned less than 0.2 g/t Au. BDRC002 – Fresh rock second zone from 113 m: A second interval of 16 m at 1.46 g/t Au from 113 m, including 1 m at 6.37 g/t Au from 114 m, was intersected 32 m downhole from the main zone, with seven samples returning more than 1 g/t Au. BDRC002 also returned lower-grade intervals of 7 m at 0.25 g/t Au from 27 m, 11 m at 0.45 g/t Au from 39 m and 4 m at 0.34 g/t Au from 204 m. In total, 26 one-metre samples from BDRC002 returned more than 1 g/t Au. BDRC002 was drilled in the opposite direction to BDRC001 to establish the structural orientation of the mineralised system. BDRC001 – Oxide gold from surface: BDRC001 returned 23 m at 2.14 g/t Au from surface, including 12 m at 3.35 g/t Au from 7 m and 2 m at 7.43 g/t Au from 8 m. Mineralisation begins in the first metre sampled, and 14 of the 23 samples returned more than 1 g/t Au, peaking at 8.06 g/t Au from 8 m. Lower-grade intervals of 9 m at 0.25 g/t Au from 37 m and 4 m at 0.20 g/t Au from 120 m were also intersected. Together, the two holes returned eight separate mineralised intervals. The relationship between the intersections in the two holes, and the true orientation and width of the mineralised zones, will be tested by further drilling. Table 2. Significant gold intersections, BDRC001 and BDRC002 Hole From m To m Downhole width m Au g/t Gram-metres BDRC001 0 23 23 2.14 49.3 including 7 19 12 3.35 40.2 including 8 10 2 7.43 14.9 BDRC001 37 46 9 0.25 2.2 BDRC001 120 124 4 0.20 0.8 BDRC002 27 34 7 0.25 1.7 BDRC002 39 50 11 0.45 4.9 BDRC002 63 81 18 7.31 131.6 including 69 81 12 8.66 103.9 including 78 79 1 15.90 15.9 BDRC002 113 129 16 1.46 23.4 including 114 115 1 6.37 6.4 BDRC002 204 208 4 0.34 1.4 Notes: Intersections were selected using geological boundaries and continuous assay anomalism, generally using a nominal 0.1 g/t Au lower cut-off and no more than two metres of internal dilution. Results below the 0.01 g/t Au detection limit were assigned 0.005 g/t Au. Gram-metres may differ slightly from rounded width multiplied by rounded grade. All widths are downhole; true widths are not known. 4 dalaroometals.com.au | ASX: DAL Figure 1. Wilfred cross-section through BDRC001 and BDRC002, looking north-west (315°), no vertical exaggeration. Upper: magnetics in plan (±45 m of section A–A′). Lower: lithology, 1 m gold assays, weathering profile and significant intercepts. Downhole widths; true widths not known. Potential lodes 1–3 and the magnetic contact at depth are interpretive and conceptual. Geological Interpretation BDRC001 intersected the principal mineralised interval from surface within laterite and saprolite (Figure 2). The 23 m interval averaged 2.14 g/t Au and included a higher-grade 12 m interval averaging 3.35 g/t Au from 7 m. This establishes a broad oxide-zone target at the first Wilfred fence. BDRC002 intersected high-grade gold in fresh, strongly silicified volcaniclastic rocks with quartz–sulphide veining and pyrite (Figure 3). The 18 m interval from 63 m averaged 7.31 g/t Au and included 12 m at 8.66 g/t Au from 69 m. A second interval of 16 m at 1.46 g/t Au from 113 m occurs within a separate strongly silicified volcaniclastic package. Oxide profile at BDRC001: BDRC001 was collared in laterite and ferricrete over a deeply weathered saprolite profile with intense limonite–goethite alteration to 35 m, passing through saprock (35–43 m) into fresh volcanic 5 dalaroometals.com.au | ASX: DAL rocks. The entire 23 m surface intersection lies within this oxide profile, and a further 9 m at 0.25 g/t Au from 37 m spans the saprock and the top of fresh rock. The oxide gold may be the weathered expression of primary mineralisation at depth, and its source is a key question for further drilling. Figure 2. Chip trays of BDRC001. Controls on the BDRC002 high-grade zone: The 18 m high-grade interval from 63 m to 81 m corresponds exactly to a logged unit of strongly silicified volcaniclastic rock with approximately 1% quartz–sulphide veining and 1% pyrite. The carbonate-altered volcaniclastic immediately above (56–63 m) and the moderately silicified volcaniclastic immediately below (81–87 m) are only weakly mineralised. This close match between grade and logged alteration suggests that strong silicification with quartz–sulphide veining is an important indicator of gold mineralisation at Wilfred. Figure 3. Chip trays of BDRC002. Silicification alone does not explain the grade distribution, however. A similarly strongly silicified interval with quartz–sulphide veining between 98 m and 113 m returned less than 0.25 g/t Au, while the second mineralised zone from 113 m lies in the lower part of the same silicified package. This points to an additional control, possibly structural, on where gold is concentrated. Identifying that control is a priority of the orientation program. 6 dalaroometals.com.au | ASX: DAL Other features: In BDRC002, 11 m at 0.45 g/t Au from 39 m lies within chlorite-altered felsic volcanic rocks containing the highest logged pyrite content in the hole (approximately 2%). Both holes intersected mafic volcanic units, including a strongly magnetic basalt in BDRC001 from 127 m to 153 m, which may serve as marker horizons for correlating stratigraphy between holes. Vein and sulphide percentages quoted in this section are visual estimates; refer to Table 3 and its accompanying cautionary statement. Visual estimates should not be considered a proxy or substitute for laboratory analyses. The opposing drill directions were designed to test alternative structural orientations. The first holes provide an initial basis for interpreting the mineralised system, but the relationship between the BDRC001 oxide intersection and the BDRC002 bedrock intersections remains subject to further drilling and geological modelling. Figure 4. Mag, Wilfred and Ali targets along the ~7 km gold-in-soil corridor. Upper: soil-gold anomaly on satellite imagery with drill collars, planned holes, artisanal workings and interpreted magnetic contact. Lower: long-section looking north-east (4× vertical exaggeration) with Wilfred RC holes, planned Mag and Ali holes, and BDRC001 and BDRC002 intercepts. Downhole widths; true widths not known. Grid: WGS84 / UTM Zone 30N. Update on Drilling Program As at 3 October 2026, nine RC holes for 1,750 m had been completed, with the tenth hole, BDRC010, in progress. This drilling forms part of the initial 24-hole, approximately 4,200 m orientation program, which is testing selected priority areas from opposing directions to establish the geological and structural controls on mineralisation. The orientation program is designed to improve Dalaroo’s understanding of the geometry, orientation and continuity of the prospective geological contacts, structures and quartz veining encountered during drilling. These observations will be integrated with the existing magnetic, geological mapping, surface sampling and soil geochemical datasets to refine the geological model and guide subsequent drilling. 7 dalaroometals.com.au | ASX: DAL Drill locations, orientations, depths and sequencing may be adjusted as assay results and geological information become available, allowing the program to respond to emerging results and prioritise the most prospective areas. A second phase of approximately 7,800 m of RC drilling is planned to follow the orientation program. This phase will systematically test and further define mineralisation across the priority target areas, bringing the total planned maiden drilling campaign to approximately 12,000 m. Drilling is being undertaken using a crawler-mounted PRD OZ RC rig supported by a 1,200 CFM/500 PSI air compressor. Following the establishment of site safety and sampling procedures and the training of local support personnel, night-shift drilling has commenced, enabling the program to advance more efficiently while maintaining the Company’s operational and quality-control standards (refer Reference 1). Figure 5. 3D cut-away of the Wilfred target looking north-west along the corridor, no vertical exaggeration. Surface: soil-gold results, drill collars, artisanal workings and interpreted magnetic contact. Front face: BDRC001 and BDRC002 section with weathering profile and intercepts. BDRC003 to BDRC010 drilled or underway; assays pending. Downhole widths; true widths not known. Potential lodes 1–3 and the magnetic contact at depth are interpretive and conceptual. Scale bar applies at the section face only. 8 dalaroometals.com.au | ASX: DAL Figure 6. Aerial view of the RC rig on a drill pad at the Wilfred target. Growth of the Bondoukou Gold Ridge Project The Bondoukou Gold Ridge Project exploration licence was granted in mid-January 2025, providing Dalaroo Metals with the opportunity to systematically evaluate a highly prospective and previously underexplored gold corridor (refer Reference 2). Dalaroo was initially attracted to the Project by a prominent regional magnetic signature coincident with extensive artisanal gold workings. This combination suggested the potential for a significant geological structure and mineralised system beneath the surface. Following the grant of the exploration licence, Dalaroo commenced a staged exploration program designed to progressively define and test this opportunity. Initial geological mapping identified a strong geological contact broadly coincident with the magnetic signature and the distribution of artisanal workings. Rock-chip sampling undertaken during the mapping program returned encouraging gold results and helped define an initial priority target extending over approximately 2.5 km of strike (refer Reference 3). Dalaroo subsequently completed systematic soil sampling across the broader prospective area. This work materially expanded the scale of the opportunity, defining a coherent gold target corridor extending approximately 7 km along strike (refer References 4 and 5). The corridor incorporates the Mag, Wilfred and Ali target areas and forms the foundation of Dalaroo’s current drilling program. 9 dalaroometals.com.au | ASX: DAL The progression from regional magnetic interpretation and artisanal workings, through geological mapping, rock- chip sampling and systematic soil geochemistry, has provided Dalaroo with multiple independent and complementary datasets supporting the Bondoukou exploration model. The drilling results reported in this announcement provide further validation of this systematic approach and represent an important step in assessing the scale, continuity and potential significance of the mineralised system at Gold Ridge. Dalaroo will use the geological and assay information generated by the current drilling program to refine its interpretation of the mineralised controls, prioritise follow-up drilling and progressively evaluate the broader ~7 km target corridor. Figure 7. Plan of the Mag, Wilfred and Ali targets along the ~7 km gold-in-soil corridor. Soil-gold results, drill holes, artisanal workings and interpreted magnetic contact (ticks on high side) on satellite imagery. Assays pending for BDRC003 to BDRC010. Grid: WGS84 / UTM Zone 30N, 1 km. 10 dalaroometals.com.au | ASX: DAL Regional Setting and Prospectivity The Bondoukou Gold Ridge Project is located within the Birimian Greenstone Belt of north-eastern Côte d’Ivoire, a prolific gold province that hosts numerous multi-million-ounce gold deposits and several recent discoveries. Gold Ridge is situated within an active exploration and development district, approximately 35 km north-east of Endeavour Mining’s Tanda-Iguela (Assafou) Gold Project and near Koulou Gold’s Gontougo Project (refer References 6 to 9). The concentration of exploration activity and recent discoveries within the district highlights the prospectivity of the underlying Birimian terrane and the strategic location of Dalaroo’s landholding. Gold mineralisation in the region is commonly associated with: • Regional shear zones. • Fold-related structural traps. • Quartz veining systems. • Volcano-sedimentary contacts. • Rheological contrasts between lithological units. At Gold Ridge, these geological features coincide with an approximately 7 km gold-in-soil corridor, extensive artisanal workings, mapped quartz veining and a broader ~9 km structural-geophysical trend (refer Reference 5). The spatial relationship between these datasets supports the interpretation of a structurally controlled gold system and provides a strong framework for ongoing exploration and drill targeting. Figure 8. Regional geology map of Côte d’Ivoire showing Dalaroo projects and major gold deposits. 11 dalaroometals.com.au | ASX: DAL Located Within a Highly Endowed Gold District The Bondoukou Gold Ridge Project is situated within one of Côte d’Ivoire’s most prospective and rapidly emerging gold regions. The Project lies within the same broader geological terrane that hosts several significant gold discoveries and development projects, including the nearby Tanda-Iguela Gold Project being advanced by Endeavour Mining. The presence of multiple multi-million-ounce gold deposits within the region demonstrates the fertility of the underlying Birimian geological belt and highlights the potential for large-scale gold systems to occur within the district. The proximity of the Bondoukou Gold Ridge Project to these deposits is not necessarily indicative of the presence of similar mineralisation at Gold Ridge. While Gold Ridge remains at an early stage of exploration and no Mineral Resource has yet been defined, the Project exhibits several geological characteristics commonly associated with major West African gold systems, including extensive strike length, widespread artisanal gold workings, favourable structural controls, supporting geophysical signatures and multiple strong gold-in-soil anomalies. Importantly, the rapid growth of the Gold Ridge gold corridor from 2.5 km to ~7 km of strike length over recent exploration campaigns (refer References 3 and 5) further reinforces the scale potential of the system. With the maiden ~12,000 m RC drilling program now underway, the Company has commenced the first systematic drill testing of the ~7 km gold corridor, located within one of Côte d’Ivoire’s most active gold districts. This represents a significant milestone in the evaluation of the Gold Ridge Project. Figure 9. Bondoukou Gold Ridge Project and neighbouring licences, including Endeavour Mining’s Tanda-Iguela (Assafou) Gold Project. 12 dalaroometals.com.au | ASX: DAL Next Steps • Report the next key assay results from BDRC003 and BDRC004, expected in early November 2026, subject to laboratory turnaround and QA/QC review. • Maintain drilling momentum and complete the 24-hole orientation program. • Rapidly integrate new assays and geological data into the three-dimensional model to sharpen priority targets. • Launch follow-up drilling at Wilfred to test the strike and depth potential of the mineralised zones. • Evaluate deeper RC and potential diamond drilling to test the system beyond the limits of the initial program. • Target extensions to the high-grade bedrock and near-surface gold mineralisation intersected in BDRC001 and BDRC002, unlocking the growth potential of the broader ~7 km Gold Ridge corridor and advancing the Project towards a potential maiden Mineral Resource estimate. Technical Commentary Frank Twum-Berima Bosompem, Exploration Manager – Côte d’Ivoire, commented: “To intersect 18 metres at 7.31 grams per tonne gold in our second hole, and gold from surface in our first, is a fantastic reward for the work the team has put into the Bondoukou Gold Ridge Project. The initial operational phase allowed us to establish robust safety procedures and train our local support personnel, and with night- shift drilling now underway the program is building strong momentum. Nine holes for 1,750 metres have been completed, and BDRC010 is in progress. “Drilling the first fence from opposing directions was a deliberate step to understand the structural setting, and both holes intersected gold. The geology we are logging, together with these first assays, is already guiding our interpretation of the controls on the mineralisation at Wilfred and how it may extend along the Gold Ridge corridor. “Samples from BDRC003 and BDRC004 on the second fence are at the laboratory, with results expected in early November 2026, and BDRC005 samples are being dispatched. As drilling progresses, observations from each hole will be incorporated into our geological interpretation and used to refine the orientation, sequence and priority of subsequent holes. “This is a dynamic, geology-led campaign designed to respond quickly to emerging information. These first results give us real confidence in the Gold Ridge corridor, and as the orientation program continues we will be well positioned to advance priority areas through additional RC drilling and potentially deeper diamond drilling.” References 1. Refer Dalaroo ASX announcement, 28 September 2026: “Drilling Progresses at Bondoukou Gold Ridge Project Amended”. 2. Refer Dalaroo ASX announcement, 9 March 2026: “Bondoukou Goldridge Due Diligence Assay Results”. 3. Refer Dalaroo ASX announcement, 19 March 2026: “Major 2.5 km Gold Drill Target Defined at Gold Ridge Bondoukou Project, Côte d’Ivoire”. 4. Refer Dalaroo ASX announcement, 2 June 2026: “Gold Ridge Soils Define 4.3km Anomaly, Peak 2,188ppb Au”. 5. Refer Dalaroo ASX announcement, 15 June 2026: “Dalaroo Defines ~7km Gold Corridor at Gold Ridge with Peak Soil Assay of 23.26g/t Au”. 6. ReferEndeavourMiningnewsrelease, 23April2026:“EndeavourannouncespositiveDFSresultsfortheAssafouProject that underpins the next phase of organic growth”. 7. Refer Ecofin Agency article, 3 June 2025: “Koulou Gold Raises C$13 Million for 2025 Exploration in Côte d’Ivoire”. 8. Refer Ecofin Agency article, 15 April 2026: “Canadian Junior Koulou GoldRaises C$21.8 Million to Expand Côte d’Ivoire Exploration”. 9. Refer Koulou Gold Corp. news release, 14 April 2026: “Koulou Gold Closes $30 Million Non-Brokered Private Placement”. 13 dalaroometals.com.au | ASX: DAL This announcement has been authorised for release to the ASX by the Company’s Board of Directors. ENDS For more information: Please visit our website: Dalaroo Metals Website John Morgan Chief Executive Officer T: +61 410 774 319 E: info@dalaroometals.com.au Competent Person’s Statement The information in this announcement that relates to Exploration Results is based on, and fairly represents, information and supporting documentation compiled by Mr John Morgan, a Member of the Australasian Institute of Mining and Metallurgy. Mr Morgan is a full-time employee and Chief Executive Officer of Dalaroo Metals Limited and holds shares and performance rights in the Company. Mr Morgan has sufficientexperience relevant to the style of mineralisation andtype of deposit under consideration, andto the exploration activities being undertaken, to qualify as a Competent Person as defined in the 2012 Edition of the Australasian Code for Reporting of Exploration Results, Mineral Resources and Ore Reserves (JORC Code). Mr Morgan consents to the inclusion in this announcement of the matters based on his information in the form and context in which they appear. The Exploration Results addressed in this announcement include new laboratory assay results for drill holes BDRC001 and BDRC002 from the Company’s current RC drilling program, visual geological observations from BDRC001 and BDRC002, and previously reported Exploration Results identified in the References section. The Company confirms that it is not aware of any new information or data that materially affects the previously reported Exploration Results referenced in this announcement. The Company also confirms that the form and context in which the relevant Competent Person’s findings were presented have not been materially modified from the original market announcements. JORC Code Table 1 disclosures covering Sections 1 and2 are providedin Appendix 1 andrelate to the current RC drilling program andthe assay results reported in this announcement. Forward-Looking Statements This announcement contains forward-looking statements which are based on current expectations, assumptions, estimates and projections. Forward-looking statements are subject to known and unknown risks, uncertainties and other factors that may cause actual results, performance or achievements to differ materially from those expressed or implied. These risks include, but are not limited to, exploration success, geological interpretation, commodity price fluctuations, regulatory approvals, permitting timelines, operational risks and market conditions. Any statements regarding potential mineralisation, exploration targets, grades, scale or development concepts are conceptual in nature and based on early-stage exploration activities, including geological mapping, surface sampling, auger drilling, geochemical analysis, geophysical surveying and early-stage RC drilling. These statements do not constitute, and should not be construed as, a Mineral Resource or Ore Reserve estimate as defined under the JORC Code. Dalaroo Metals Limited undertakes no obligation to update or revise any forward-looking statements, except as required by law. About Dalaroo Metals Dalaroo Metals Limited is an ASX-listed exploration company focused on the discovery and development of high-quality gold and critical minerals projects across Australia and international jurisdictions. The Company’s portfolio includes the Blue Lagoon Project in south-west Greenland, prospective for rare earth elements (REE), zirconium and niobium, a rapidly growing portfolio of gold exploration assets in Côte d’Ivoire, including the Bondoukou Gold Ridge Project within the highly endowed Birimian Greenstone Belt of West Africa, and the Lyons River and Watheroo Projects in Western Australia. Dalaroo’s strategy is to systematically advance its projects through modern exploration techniques, resource definition, and strategic partnerships, with a strong focus on value creation for shareholders. The Company is