Drill Pads Complete Ahead of Fully Funded 12,000m RC Program
Released
Released
Announcement PDF
ASX ANNOUNCEMENT
DRILL PADS COMPLETE AHEAD OF FULLY FUNDED 12,000m
MAIDEN RC PROGRAM AT BONDOUKOU
Fully funded 12,000-metre maiden drilling campaign to test three priority gold
targets.
Highlights:
For further information about Dalaroo, please Click Here.
10 August 2026
• Drill pads and access routes completed ahead of Dalaroo’s maiden drilling campaign at
the Bondoukou Gold Ridge Project.
• Following the Company’s successful capital raising, the initial Phase 1 RC program has
been expanded from 10,000 metres to 12,000 metres, enabling Dalaroo to
systematically test Mag, Wilfred and Ali.
• Opposing drill directions will be used during the opening sequence to test alternative
structural orientations and reduce the risk of drilling parallel to the targeted mineralised
structures.
• Subject to geological observations from the initial scissor holes, the indicative follow-up
program comprises a further 78 RC holes, bringing the total number of planned holes to
102, across eleven drill fences.
• Phase 1 forms the opening stage of Dalaroo’s broader planned 20,000-metre phased
drilling strategy, with Phase 2 and Phase 3 to be designed using the geological model
developed during the 12,000-metre program.
• Drilling is intended to continue while assays are pending, maintaining operational
momentum and allowing geological information to guide the immediate progression of
the program.
• Initial assay results are expected approximately four to six weeks after the first sample
batches are delivered to the laboratory.
2
dalaroometals.com.au | ASX: DAL
Dalaroo Metals Ltd (ASX: DAL, OTCQB: DALMF) is pleased to advise that initial drill pads and access routes have
been completed at the Company’s Bondoukou Gold Ridge Project in Côte d’Ivoire. This important milestone
clears the way for final rig mobilisation ahead of Dalaroo’s fully funded 12,000-metre Phase 1 RC program — the
Company’s maiden drilling campaign at Gold Ridge and the first direct test of the Mag, Wilfred and Ali targets at
depth.
With the fully funded 12,000-metre Phase 1 program commencing by 15 August 2026 and initial assay results
expected approximately four to six weeks after the first sample batches are delivered to the laboratory, Dalaroo
is set to systematically test the Mag, Wilfred and Ali targets. The program has been developed by integrating
Dalaroo’s soil and auger geochemistry, geological mapping, magnetic interpretation and the distribution of
artisanal workings. This combined dataset will be used to directly test the geological and structural controls on
the targeted gold mineralisation beneath the extensive surface anomalies.
The opening stage will comprise scissor holes at each of the Mag, Wilfred and Ali targets. Opposing drill
directions will be used to test alternative structural orientations, improve Dalaroo’s understanding of
mineralisation geometry at each prospect and establish the preferred orientation for subsequent fence drilling.
Following geological review of the initial scissor holes, drilling will progress into systematic fence drilling across
Mag, Wilfred and Ali. The orientation, spacing, depth and location of each fence will be refined using the
geometry established during the opening stage. Final sequencing will remain flexible, allowing drilling metres to
be progressively directed toward the areas demonstrating the strongest geological potential as the Company’s
understanding of the subsurface geology develops.
Figure 1. Initial drill pad preparation completed ahead of RC drilling at the Bondoukou Gold Ridge Project.
3
dalaroometals.com.au | ASX: DAL
Discovery-Focused Initial Drilling
The opening stage will test each of the Mag, Wilfred and Ali targets using scissor holes selected from Dalaroo’s
integrated soil and auger geochemistry, geological mapping, magnetic interpretation and the distribution of
artisanal workings.
The opening holes are designed to establish:
• the preferred orientation and geometry of the targeted mineralised structures;
• the relationship between surface gold anomalism, interpreted geology, magnetic features and artisanal
workings;
• the distribution of lithological contacts, weathering, alteration, quartz veining and sulphides;
• whether the targeted structures showpotential continuity along strikeand across the width ofthe surface
anomaly; and
• the most effective drilling orientation and spacing for systematic follow-up drilling.
Each priority target will initially be tested using opposing drill directions. This scissor-drilling approach is
designed to reduce the risk that the opening holes are drilled parallel or subparallel to the principal targeted
structures, establish the orientation and geometry of mineralisation at each prospect and determine the
preferred drilling direction before systematic fence drilling advances.
Geological logging and field observations will be reviewed following each completed hole. Lithology, alteration,
quartz veining, sulphide occurrence, weathering and interpreted structural relationships will be incorporated
into Dalaroo’s evolving geological model and used to refine the next stage of drilling.
Part of Program Indicative Holes Average Depth (m) Metres
Initial Orientation Drilling 24 175 4,200 m
Fence Drilling 78 100 7,800 m
Total Program 102 - 12,000 m
Expanded 12,000-Metre Phase 1 within Broader Phased Program
Following the Company’s successful capital raising, Dalaroo has increased the fully funded Phase 1 RC drilling
program from 10,000 metres to 12,000 metres. The expanded program allows the Company to systematically
test Mag, Wilfred and Ali during Phase 1 and establish a broader geological understanding of the Gold Ridge
corridor before designing subsequent phases of drilling. Initial scissor holes at each target will establish
mineralisation geometry and the preferred drilling orientation before systematic fence drilling commences.
Following completion and geological review of the opening scissor holes, the program will progress into
systematic fence drilling across Mag, Wilfred and Ali. The 12,000-metre program provides Dalaroo with a
substantial framework to evaluate the geometry, scale and continuity of mineralisation across the broader Gold
Ridge corridor, while retaining flexibility to adjust the allocation of metres between targets as geological
understanding improves.
Where appropriate, follow-up drill fences will use the established surface sampling alignments across Mag,
Wilfred and Ali, allowing drilling results to be directly integrated with the existing geological, geochemical and
magnetic datasets. Fence spacing, collar spacing and hole orientation will be refined for each target using the
geological information obtained from the initial scissor holes. Using established access and sampling
4
dalaroometals.com.au | ASX: DAL
alignments where practical is also expected to minimise additional clearing, reduce ground disturbance and
limit further crop-compensation requirements.
The program will be actively managed rather than treated as a fixed sequence of predetermined holes.
Individual holes may be moved, extended, shortened, reoriented or replaced as geological understanding
improves, allowing Dalaroo to maintain broad systematic coverage while progressively redirecting metres
toward developing priority zones.
The program will advance across all three priority targets, Mag, Wilfred and Ali, using a staged, geology-led
approach. Initial scissor drilling at each prospect will establish mineralisation geometry before progressing to
further fence drilling across the targets. Geological logging, structural observations and downhole survey
information will guide immediate drilling decisions, with assay results incorporated into the evolving geological
model as they are received and used to further strengthen targeting throughout the program.
Figure 2. Indicative eleven-fence RC drilling layout across the Mag, Wilfred and Ali Targets, showing surface gold geochemistry
and planned drill coverage. Final collar positions and hole orientations remain subject to ongoing geological review.
Broader Phased Drilling Strategy
Dalaroo is advancing Gold Ridge through a broader phased drilling strategy designed to progressively build
geological understanding before committing subsequent drilling metres. The current fully funded 12,000-metre
Phase 1 program forms the opening stage of Dalaroo’s broader planned 20,000-metre drilling program.
Geological logging, structural observations, downhole survey information and assay results from Phase 1 will
be progressively integrated into an evolving geological model across Mag, Wilfred and Ali. This model will
provide the foundation for the design and prioritisation of Phase 2 and Phase 3, with subsequent drilling
locations, orientations, spacing, depths and drilling methods refined using the geological understanding
developed during Phase 1.
This phased, geology-led approach provides Dalaroo with the flexibility to progressively refine its exploration
strategy as new information becomes available and to direct subsequent drilling toward the areas
demonstrating the strongest geological and mineralisation potential.
5
dalaroometals.com.au | ASX: DAL
Drilling and Assay Timeline
RC drilling is scheduled tocommence no later than 15 August 2026,following completion of final rig mobilisation
and the remaining site-readiness activities. The Company’s field team will continue working closely with the
drilling contractor to complete final operational checks and ensure that drilling can begin safely and efficiently.
Samples will be collected, prepared and delivered progressively to Intertek as drilling advances, with laboratory
deliveries currently anticipated on approximately a weekly basis. This staged submission process is intended to
maintain a consistent flow of samples, avoid the accumulation of large batches and support the progressive
receipt of assay results throughout the drilling program. Based on current laboratory guidance, assay results are
expected approximately four to six weeks after delivery of each sample batch to the laboratory.
Geological logging and field observations will be reviewed as each hole is completed, allowing emerging
geological information to be incorporated into ongoing drill targeting while assays are pending. Selected sample
batches may also be submitted for expedited analysis where logging identifies priority structures, strong
alteration, significant quartz veining, elevated sulphide content or other geological features considered
important to the interpretation and targeting of potential mineralisation. Results will be incorporated into the
Company’s geological model as they become available and used alongside geological observations to refine
subsequent drilling priorities, hole locations and orientations during the program where appropriate.
Figure 3. Drill pad preparation complete at Wilfred target.
6
dalaroometals.com.au | ASX: DAL
Management Commentary
Dalaroo Chief Executive Officer, John Morgan, commented:
“Completion of the initial drill pads and access routes is a significant milestone for Dalaroo, positioning the
Company to commence its maiden drilling campaign at Gold Ridge. This will be the first time the extensive
surface gold anomalies at Mag, Wilfred and Ali are directly tested at depth, representing an important step in
determining the discovery potential of the broader Gold Ridge corridor.
“The success of our recent capital raising has allowed us to expand Phase 1 from 10,000 metres to 12,000 metres
and systematically test Mag, Wilfred and Ali before determining where the next phases of drilling should be
focused.
“Our broader strategy at Gold Ridge is deliberately phased and geology-led. We will begin with scissor holes at
Mag, Wilfred and Ali to establish the orientation and geometry of mineralisation before progressing into
systematic fence drilling. The geological model developed from Phase 1 will then guide the design and
prioritisation of Phase 2 and Phase 3 within our broader planned 20,000-metre program, giving our geological
team the flexibility to direct subsequent drilling toward the areas demonstrating the strongest potential.
“With the 12,000-metre Phase 1 program fully funded, drilling scheduled to commence no later than 15 August
and initial assay results expected approximately four to six weeks after the first sample batches are delivered to
the laboratory, Dalaroo is entering an exciting and potentially defining period of exploration at the Bondoukou
Gold Ridge Project.”
Frank Twum-Berima Bosompem, Exploration Manager – Côte d’Ivoire, commented:
“Gold Ridge contains three distinct priority targets supported by the integration of surface and auger
geochemistry, interpreted geology and structures, magnetic data and the distribution of artisanal workings
across Mag, Wilfred and Ali.
“The opening scissor holes are designed to answer the key geological questions early in the program. By drilling
in opposing directions at each prospect, we can better understand the orientation and geometry of the targeted
mineralised structures before advancing into systematic fence drilling across all three targets.
“Throughout Phase 1, our geological team will continuously integrate RC chip logging, structural observations,
downhole survey information and assay results into the evolving geological model. This will allow us to refine
hole positions and orientations as drilling progresses and provide the technical basis for planning and prioritising
Phase 2 and Phase 3 drilling.”
Next Steps
The Company’s immediate activities at the Bondoukou Gold Ridge Project include:
• commencement of RC drilling;
• completion and geological review of the initial scissor drilling at Mag, Wilfred and Ali;
• progression into systematic follow-up fence drilling across all three targets, subject to geological
observations;
• progressive sample dispatch to Intertek for laboratory analysis;
• progressive development and refinement of an integrated Gold Ridge geological model incorporating
results from Mag, Wilfred and Ali;
• use of the Phase 1 geological model to design and prioritise Phase 2 and Phase 3 drilling within the
broader planned 20,000-metre Gold Ridge program; and
• continued engagement with local communities, landholders and project stakeholders.
7
dalaroometals.com.au | ASX: DAL
Reference:
1. Refer Dalaroo ASX announcement, 9 March 2026: “Bondoukou Goldridge Due Diligence Assay Results”.
2. Refer Dalaroo ASX announcement, 19 March 2026: “Major 2.5 km Gold Drill Target Defined at Gold Ridge
Bondoukou Project, Côte d’Ivoire”.
3. Refer Dalaroo ASX announcement, 2 June 2026: “Gold Ridge Soils Define 4.3km Anomaly, Peak 2,188ppb Au”.
4. Refer Dalaroo ASX announcement, 15 June 2026:“Dalaroo Defines ~7km Gold Corridor at Gold Ridge with Peak Soil
Assay of 23.26g/t Au”.
This announcement has been authorised for release to the ASX by the Company's Board of Directors.
ENDS
For more Information:
Please visit our website for more information: Dalaroo Metals Website
John Morgan
Chief Executive Officer
T: +61 410 774 319
E: info@dalaroometals.com.au
Competent Persons Statement
The information in this report that relates to exploration results is based on information compiled by John Morgan, a
Member of the Australasian Institute of Mining and Metallurgy (AusIMM) and the CEO of Dalaroo Metals Ltd. Mr Morgan
has sufficient experience relevant to the style of mineralisation and type of deposit under consideration and to the activity
undertaken to qualify as a Competent Person as defined in the 2012 Edition of the Australasian Code for Reporting of
Exploration Results, Mineral Resources and Ore Reserves (JORC Code). Mr Morgan consents to the inclusion in this report
of the matters based on this information in the form and context in which it appears.
Forward-Looking Statements
This announcement contains forward-looking statements which are based on current expectations, assumptions,
estimates and projections. Forward-looking statements are subject to known and unknown risks, uncertainties and other
factors that may cause actual results, performance or achievements to differ materially from those expressed or implied.
These risks include, but are not limited to, exploration success, geological interpretation, commodity price fluctuations,
regulatory approvals, permitting timelines, operational risks and market conditions.
Any statements regarding potential mineralisation, exploration targets, grades, scale or development concepts are
conceptual in nature and based on early-stage exploration activities, including geological mapping, surface and auger
sampling, geochemical analysis and geophysical surveying. These statements do not constitute, and should not be
construed as, a Mineral Resource or Ore Reserve estimate as defined under the JORC Code. References to peer projects,
market pricing, strategic significance or potential future development pathways are provided for contextual purposes only
and should not be interpreted as a forecast of future performance or valuation. Dalaroo Metals Limited undertakes no
obligation to update or revise any forward-looking statements, except as required by law.
The Company confirms that it is not aware of any new information or data that materially affects the information included in
the referenced market announcements and that all material assumptions and technical parameters underpinning those
announcements continue to apply and have not materially changed.
About Dalaroo Metals
Dalaroo Metals Limited is an ASX-listed exploration company focused on the discovery and
development of high-quality gold and critical minerals projects across Australia and
international jurisdictions.
The Company’s portfolio includes the Blue Lagoon Project in south-west Greenland,
prospective for rare earth elements (REE), zirconium and niobium, a rapidly growing portfolio of
gold exploration assets in Côte d’Ivoire, including the Bondoukou and Bongouanou Gold
Projects within the highly endowed Birimian Greenstone Belt of West Africa, and the Lyons
River and Watheroo Projects in Western Australia.
Dalaroo’s strategy is to systematically advance its projects through modern exploration
techniques, resource definition and strategic partnerships, with a strong focus on value creation
for shareholders. The Company is committed to responsible exploration, strong corporate
governance and building long-term stakeholder relationships in the regions in which it operates.
dalaroometals.com.au | ASX: DAL
9
dalaroometals.com.au | ASX: DAL
Share your feedback
Discover